Hiring your first
    pool tech

    Your first hire is the jump from a job to a business. Here's how to know you're ready, what a tech really costs, the classification and insurance rules, and how to train them so your customers don't notice the change.

    Gavin Batson

    Written by Gavin Batson

    Founder, Pool Pro · Updated November 18, 2026

    This page covers employment law and taxes in general terms. It isn't legal or tax advice. Rules vary by state, so check with an employment attorney, your accountant or your payroll provider before you hire.

    Are you ready to hire?

    There's no magic account count, but the signs are consistent. You're probably ready when most of these are true:

    • Your route is full. You're doing as many pools a day as you can do well, and you're turning down or wait-listing new accounts. See how many pools a tech can service per day.
    • You're working 50 to 60 hours a week and the office work (quotes, billing, repairs, calls) happens at night.
    • You have steady demand beyond your capacity, not one good spring.
    • Your prices leave room for labor. If you priced as a solo owner who pays himself what's left over, a tech's wage may eat the whole margin. Check with the pricing calculator first, and raise prices if needed (how to raise pool service prices).
    • You have cash for the ramp. A new tech costs full wages during training while producing less.

    A full-service tech on a typical route commonly handles about 8 to 12 pools a day, which is roughly 40 to 60 weekly accounts over five days. You'll need enough accounts to give a new tech a real route, or a plan to fill one quickly. Our guide to getting pool service customers covers that.

    The two ways to use your first hire

    Give them the route, take the office. The tech runs weekly cleaning. You do repairs, green pools, sales and admin. This is usually the better move, because repairs and sales earn more per hour than cleaning.

    Split the route and both clean. You keep cleaning half the week and grow faster. It works, but owners who do this often find the office work never gets done.

    Employee or 1099 contractor?

    Many owners want to start with a 1099 contractor to avoid payroll taxes and workers' comp. The label you choose doesn't decide it. How the work is actually done does.

    The IRS test

    For federal employment taxes, the IRS uses common-law rules and looks at three groups of evidence: behavioral control (do you direct what work is done and how, through instructions and training?), financial control (who pays expenses, who supplies tools and equipment, can the worker make or lose money, how they're paid) and the relationship of the parties (contracts, benefits, whether it's ongoing, whether the work is a key part of your regular business) (IRS Topic No. 762; IRS Publication 15-A). If you're unsure, you can ask the IRS to decide by filing Form SS-8.

    The Department of Labor test

    For minimum wage and overtime under the Fair Labor Standards Act, the Department of Labor uses an "economic reality" test: is the worker in business for themselves, or economically dependent on yours? Since May 2025, DOL investigators have applied the framework in Fact Sheet #13 rather than the 2024 rule (DOL Field Assistance Bulletin 2025-1), and DOL proposed a replacement rule in February 2026. Check where that stands when you hire. States can be stricter: California presumes a worker is an employee unless the business proves all three parts of its "ABC" test (California Labor Code 2775).

    How a typical pool tech looks under these tests

    FactorPoints to employeePoints to contractor
    Who sets the route and scheduleYou assign stops and daysThey pick their own customers and days
    How the work is doneYou train them on your process and check itThey use their own methods
    Truck, tools, chemicalsYou provide themThey provide and pay for their own
    Who owns the customerCustomers sign with your companyThey have their own customers and other clients
    Profit or lossPaid per hour or per stop with no real riskCan make or lose money based on their own decisions
    DurationOngoing, open-endedSpecific project or limited period

    A tech who drives your route, on your schedule, in your truck, with your chemicals, following your checklist, looks like an employee under all of these tests. A genuine subcontractor runs their own pool business, has their own customers and insurance, and you hire them to cover a set of accounts on their terms.

    The cost of getting it wrong

    If you treat an employee as a contractor without a reasonable basis, the IRS can hold you liable for the employment taxes you should have withheld and paid, plus penalties and interest. Under the FLSA you can owe back overtime and minimum wage. States can add unemployment tax, workers' comp penalties and their own wage claims, and an injured "contractor" with no comp coverage can turn into a lawsuit. The IRS Voluntary Classification Settlement Program offers partial relief to businesses that reclassify workers going forward.

    How to pay your tech

    Hourly and per-stop pay are both common in pool service. Per-stop pay rewards an efficient route but needs quality controls, and employees paid per stop still have to earn at least minimum wage for all hours and get overtime over 40 hours a week. The full comparison is in paying pool techs per stop vs hourly. A common approach is to pay hourly during training, then move to per-stop pay once the tech knows the route.

    Workers' comp, insurance and the truck

    Workers' comp

    Most states require workers' comp once you have employees, but the thresholds and exceptions vary. Florida, for example, requires it for non-construction businesses with four or more employees, counting part-time workers and corporate officers who haven't exempted themselves (Florida Division of Workers' Compensation). Texas lets most private employers choose not to carry it, but those "non-subscribers" must file notices and give up some legal defenses if an employee sues over an injury (Texas Department of Insurance). Even where it's optional, carry it. Pool work means chemicals, ladders, wet decks and a lot of driving.

    What changes on your other policies

    • Commercial auto: add the tech as a listed driver. Your insurer will check their driving record and may refuse or surcharge a driver with violations.
    • If the tech drives their own vehicle: ask about hired and non-owned auto coverage. Their personal policy may exclude business use, and an accident on your route can land on you.
    • General liability: often rated partly on payroll, so expect the premium to change at your next audit.
    • Theft and dishonesty coverage: techs have gate codes and access to customers' yards. A crime policy or employee dishonesty bond covers losses if an employee steals.

    See pool service insurance cost for typical premiums per policy.

    Background checks and driving records

    Your tech will drive your truck, handle chemicals and walk into customers' backyards alone. Check the driving record at minimum, and consider a criminal background check.

    • Follow the FCRA if you use a screening company. You need the applicant's written permission, given on a standalone disclosure (not buried in the application). If you decide not to hire based on the report, send a pre-adverse action notice with a copy of the report first, then a final adverse action notice (FTC and EEOC, Background Checks: What Employers Need to Know).
    • Apply the same checks to every applicant for the same job, and don't use a blanket rule that excludes anyone with any record. Many states and cities also limit when you can ask about criminal history.
    • Run the driving record before the offer is final and send it to your insurer. There's no point training someone your carrier won't cover.

    The paperwork for a first employee

    • An EIN and payroll account with your state (withholding and unemployment).
    • Form W-4 from the employee, and Form I-9 to verify they can work in the U.S.
    • New hire reporting to your state, which federal law requires within 20 days of hire (some states are faster).
    • Required workplace posters and any state notices.
    • A payroll provider. It's worth it for the first hire, since it handles withholding, deposits and filings.

    What a tech really costs: a worked example

    The wage is only part of it. Here's an example for one full-time tech in a company truck. Every number is an assumption to replace with your own quotes and local wages.

    CostAssumptionPer year
    Wages$20/hour × 40 hours × 52 weeks$41,600
    Employer Social Security and Medicare7.65% of wages$3,182
    Federal unemployment (FUTA)0.6% of the first $7,000, after the full state credit$42
    State unemploymentVaries by state and your rate~$500
    Workers' compExample rate of $2.50 per $100 of payroll (get a quote)~$1,040
    Truck: payment, commercial auto, fuel, maintenance~$1,000/month~$12,000
    Phone, uniforms, test kit, toolsRough allowance~$1,100
    Total~$59,500

    Employer FICA rate from IRS Publication 15. FUTA is 6.0% on the first $7,000 of wages, reduced to 0.6% with the maximum state credit; employers in credit reduction states pay more (IRS Topic No. 759). Overtime, paid time off and benefits would add to this.

    How many accounts pay for that?

    Say your average weekly account bills $160 a month and chemicals cost you about $25 of that. Each account contributes about $135 a month, or $1,620 a year, toward labor and overhead. Divide the tech's $59,500 by $1,620 and you get about 37 accounts just to cover the tech. A route of 55 accounts at those numbers contributes about $89,100 a year, leaving roughly $29,600 toward your overhead and profit.

    That's why pricing matters so much when you hire. At $130 a month the same route barely covers the tech. Run your real numbers in the pricing calculator, and count the training period: a new tech might take two to four weeks before they carry a full route.

    A training plan for the first 2 to 4 weeks

    PeriodFocusWhat happens
    Week 1Ride-alongThe tech rides with you every stop. You narrate: the stop routine, testing, dosing math, equipment, gate and dog notes, customer preferences. They do the physical work by the end of the week while you watch.
    Week 2Reverse ride-alongThey drive and run the stop. You watch, check their readings and doses, and correct on the spot. Cover safety: chemical storage, never mixing products, PPE, electrical hazards.
    Week 3Solo with checksThey run part of the route alone. You spot-check behind them the same day and review photos and logs every evening.
    Week 4Full routeFull solo route. Spot-checks drop to a few pools a week. Hold a short review at the end of the week.

    An experienced hire may skip a week. Someone new to pools may need more. Teach the chemistry properly: give them the FC/CYA chart, show them the chemical calculator and the LSI calculator, and write your stop routine as a one-page checklist so every pool gets the same service.

    Quality checks that keep customers

    • Photos at every stop: the pool after service and the equipment pad. They prove the visit happened and show problems early.
    • Logged readings every visit, so you can see drift and skipped tests from your desk. A chemical log sheet works on paper.
    • Service reports to customers after each visit. A pool service report card shows the customer what was done, by whom.
    • Unannounced spot-checks a few times a month, even after training.
    • A minimum time on site if you pay per stop.
    • Call the first few customers after the switch and ask how it's going.

    Pool Pro's tech app records photos, chemical readings and GPS check-in at each stop, and customers see their service history in their own portal, so quality is visible without riding along.

    Keeping your customers when a tech leaves

    The biggest risk of hiring isn't cost. It's a tech who learns your route, then leaves and takes customers with them. You can't remove the risk, but you can shrink it:

    • The customer relationship belongs to the company. Customers sign your service agreement, get invoices from your company, and contact the office, not the tech's personal phone.
    • Stay visible. Introduce new techs with a note from you. Handle repairs, problems and price changes yourself.
    • Keep the route data in your system, not in the tech's head: gate codes, equipment, notes and history.
    • Use a non-solicitation and confidentiality agreement where it's enforceable. State law decides this. California voids most noncompete agreements under Business and Professions Code 16600, and its courts have applied that reasoning to many customer non-solicitation clauses too. The FTC's nationwide noncompete ban never took effect, and the FTC moved to drop its appeals in September 2025. Have a local employment attorney draft yours.
    • Pay and treat good techs well. A tech who's paid fairly and has a future in your company is far less likely to start a competing route.
    • When someone leaves, change gate codes you control, call every customer on their route that week, and ride the route yourself or with the replacement.

    Common questions

    How many accounts should I have before hiring a pool tech?

    Enough to give the tech a real route, plus your own work. In the worked example above, it takes about 37 accounts at $160 a month just to cover a tech's full cost. Most owners hire when their own route is full and they're turning work away.

    Can I pay my pool tech as a 1099 contractor?

    Only if they're genuinely in business for themselves. A tech who runs your route, on your schedule, in your truck, using your methods, is very likely an employee under IRS, Department of Labor and state tests. Misclassification can mean back taxes, penalties and back wages.

    Do I need workers' comp for one employee?

    In many states, yes. Some states set thresholds (Florida's is four employees for non-construction businesses), and Texas lets most private employers opt out. Check your state's workers' comp agency, and consider carrying it either way.

    How much should I pay my first pool tech?

    It depends on your market and their experience. See paying pool techs per stop vs hourly for typical pay and how each model works.

    How long does it take to train a new pool tech?

    Plan on two to four weeks before they run a full route alone, with spot-checks continuing after that. People new to pools need more time on chemistry and equipment.

    Can I stop a tech from taking my customers?

    Partly. Make sure customers contract with your company, keep the relationship and data in the company, and use a non-solicitation agreement where your state enforces one. Enforceability varies by state, so get it drafted locally.

    Run your pool business from one place.

    Pool Pro handles scheduling, route optimization, chemistry logs and automatic billing. Plans start at $35/month.

    Route optimizationAutomated invoicingChemistry logs with LSI