The ranges on this page are typical ranges drawn from published local price lists, consumer cost guides and what owners report charging in 2025 and 2026. No association publishes an official benchmark, and prices swing a lot between metros. Use them to sanity-check your own numbers, then price from your costs.
Typical monthly rates at a glance
Most residential pool service is sold as a flat monthly price for a weekly visit. Here's where residential rates usually land for an average backyard pool (roughly 12,000 to 20,000 gallons, one body of water, normal debris).
| Service type | Typical monthly price | What's usually included |
|---|---|---|
| Full service, weekly | $120–$250 | Test and balance, chemicals (in most markets), skim, brush, vacuum as needed, empty baskets, check equipment, backwash as needed |
| Chemical-only, weekly | $80–$150 | Test and balance, chemicals, empty baskets. The owner does the brushing and vacuuming |
| Full service, every two weeks | $90–$170 | Same as weekly, but each visit takes longer and uses more chemicals |
| Twice a week | $220–$400+ | Heavy-use, heavy-debris or rental pools. Often priced per visit |
| Seasonal weekly (northern markets) | $160–$300 per month of season, or $45–$90 per visit | Same as full service, sold for the swim season only |
Typical ranges. The low end is usually a solo operator with a dense route in a competitive Sun Belt metro. The high end is larger pools, high-cost metros and companies with a strong reputation.
Notice that biweekly isn't half of weekly. It's usually 60–75% of the weekly price, because the pool is dirtier at every visit, the chlorine has to last twice as long, and the drive to get there costs exactly the same. Chemical-only also isn't half price: the drive and the chemicals are the same, only the brushing and vacuuming go away.
Rates by market
Price follows three things: local labor cost, how long the swim season is, and how crowded the market is. Florida and Phoenix have a huge number of pools and a lot of competition, which keeps rates lower than the pool count alone would suggest. California's labor and fuel costs push it up. Northern markets sell fewer months, so the monthly rate during the season is higher.
| Market | Typical weekly full service | Notes |
|---|---|---|
| Florida | $100–$180/mo | Year-round. Screened pools are often priced $10–$20 below open pools. Chemicals usually included |
| Arizona and Nevada | $90–$170/mo | Year-round. Very competitive in Phoenix and Las Vegas. Summer heat drives chlorine use, filter cleans often extra |
| Texas | $120–$200/mo | Plus-chemicals pricing is more common here than in Florida. Pool maintenance is taxable in Texas (see the tax note below) |
| California | $130–$250+/mo | Higher labor, fuel and chemical costs. Liquid chlorine costs noticeably more than in Florida |
| Southeast (Georgia, Carolinas) | $130–$220/mo | Often a 7–9 month season with openings, closings or winter visits sold separately |
| Northeast and Midwest | $160–$300/mo in season | Short season. Openings and closings are a big share of revenue |
Typical ranges by region, compiled from local company price pages, marketplace listings and owner reports. Your metro can sit well outside these. Call three competitors as a customer if you want to know your local number.
Market rates tell you what customers will accept. They don't tell you whether a price is profitable for you. A company with a tight route and a fast tech can make good money at a price that would sink a company driving 15 minutes between stops. That's why the rest of this guide is about your costs.
What makes one pool cost more than another
Charging every pool the same flat rate is the most common pricing mistake. The easy pools subsidize the hard ones, and the hard ones are the ones most likely to stay with you because nobody else will take them at that price. Build a base rate, then adjust for the things that add time or chemicals.
| Factor | Typical adjustment | Why |
|---|---|---|
| Pool size over about 20,000 gallons | +$10–$30/mo | More surface to brush, longer vacuuming, more chlorine |
| Screen enclosure | −$10–$20/mo vs an open pool | Far less debris and lower chlorine demand |
| Heavy trees or debris | +$10–$40/mo | Longer stops, more frequent filter cleaning, higher chlorine demand from organics |
| Attached spa | +$10–$25/mo | Extra brushing and a second set of readings in some setups |
| Separate (detached) spa | +$20–$40/mo | Effectively a second body of water to test and treat |
| Salt system | $0 to +$10/mo | Less chlorine to buy, but cell inspection and cleaning. Many companies charge the same and bill cell cleans separately |
| Water features, in-floor cleaning, automation | +$5–$20/mo | More equipment to check and more to go wrong |
| Off-route or long drive | +$10–$25/mo, or decline | Drive time is paid time that earns nothing |
| Access problems (locked gates, dogs, steep steps) | +$5–$15/mo | Minutes lost every single week |
| Chemicals billed separately | −$20–$50/mo off the base | The customer pays for chemicals on top. See the chemicals section |
Typical adjustments used by owners. Set your own from the extra minutes and chemicals each factor really costs you.
Salt vs chlorine
A salt pool still uses chlorine: the cell makes it from salt. You buy less liquid chlorine, but you still balance pH (salt pools tend to drift up and use acid), add salt after heavy rain or a drain, and inspect and clean the cell. Cells also fail, and a replacement runs several hundred dollars or more. Most owners charge salt pools the same as chlorine pools and list cell cleaning, salt and cell replacement as extras. If you include salt in the monthly price, cap it.
Pool size
If a customer doesn't know their gallons, measure and use the pool volume calculator. Gallons drive your chemical cost directly, and surface area drives brushing and vacuuming time.
How to build a price from your cost per stop
Here's the formula behind the pool service pricing calculator:
Monthly price = (cost per visit × visits per month + overhead per pool) ÷ (1 − target margin)
- Cost per visit = paid minutes on site and driving × loaded labor rate, plus chemicals per visit, plus vehicle cost for the miles.
- Visits per month for weekly service is 52 ÷ 12 = 4.33, not 4. Months with five service days are why.
- Overhead per pool = insurance, software, phone, office, accounting and marketing for the month, divided by your number of accounts.
- Loaded labor rate is the wage plus payroll taxes, workers' comp and benefits, commonly 20–30% on top of the wage. If you run the route yourself, use what you'd pay someone to replace you.
Worked example: a typical weekly account
| Input | Value | Cost |
|---|---|---|
| Time on site | 20 min | 32 min × $28/hr loaded = $14.93 |
| Drive from the last stop | 12 min | |
| Chemicals per visit | $7 | $7.00 |
| Vehicle | 5 miles × $0.70 | $3.50 |
| Cost per visit | $25.43 | |
| × 4.33 visits per month | $110.21 | |
| Overhead | $1,200/mo ÷ 60 accounts | $20.00 |
| Cost per pool per month | $130.21 | |
| Price at a 30% margin | $130.21 ÷ 0.70 | $186 |
If that market pays $150 for weekly service, the account loses its margin. The fix isn't always a higher price. Look at what happens when only the route changes:
| Same pool, different situation | Cost per month | Price at 30% margin |
|---|---|---|
| Tight route: 6-minute drive, 2 miles | $108.98 | $156 |
| Typical route: 12-minute drive, 5 miles | $130.21 | $186 |
| Spread-out route: 20-minute drive, 10 miles | $161.56 | $231 |
| Heavy-debris pool on a typical route: 30 min on site, $9 chemicals | $159.10 | $227 |
| Chemical-only, 10 min on site, tight route | $88.76 | $127 |
| Biweekly, 25 min on site, $10 chemicals per visit | $86.66 | $124 |
Calculated with the formula above at $28/hr loaded labor, $0.70/mile and $20/month overhead per pool. Plug in your own numbers.
Two lessons from that table. First, route density is worth as much as a price increase. Cutting the drive from 12 to 6 minutes saves about $30 a month per pool. Second, chemical-only only works on a tight route. At the typical market rate of $80–$150, a chemical-only account with a 12-minute drive barely breaks even. For more on stops and drive time, see how many pools a tech can service per day. Pool Pro's route optimization re-sequences stops whenever accounts change, which is the cheapest way to bring that drive number down.
What margin to target
The margin in the formula is what's left after labor, chemicals, vehicle and overhead. Owners commonly aim for 20–35% on recurring service. Below about 15%, one bad month (a chlorine price spike, a truck repair, a tech out sick) wipes out the profit. If you run the route yourself and paid yourself a fair wage in the labor rate, the margin is real profit on top of that. If you didn't, it isn't. More on that in is a pool service business profitable.
Set minimums and stick to them
- A minimum monthly rate. Work out your cost for the smallest, easiest pool on a tight route and add your margin. That's your floor. Don't go below it to win an account, because that customer will tell the neighbors what they pay.
- A minimum service call. One-time visits (a pump that won't prime, a breaker that tripped) should carry a trip or diagnostic charge, commonly $75–$150, before parts and repair labor. Many companies waive or discount it for weekly customers.
- A start-up fee for neglected pools. If the pool isn't swimmable on day one, the first visit is a cleanup job, not a weekly stop. Price it separately (see the green pool cleanup pricing guide) and start the monthly rate once the water is clear.
- A minimum term or notice period. A 30-day cancellation notice in your service agreement stops customers from signing up for summer and canceling in October.
One-time services: a price list overview
Recurring service keeps the lights on. One-time work is where a lot of the profit is, because it uses the trips and customer relationships you already have. Here are typical ranges for the jobs most pool companies sell. Each one has its own guide with more detail.
| Service | Typical price | More detail |
|---|---|---|
| Cartridge filter clean | $80–$150 | Filter and acid wash pricing |
| DE filter teardown and recharge | $100–$200 | Filter and acid wash pricing |
| Sand change | $250–$400 including sand | Filter and acid wash pricing |
| Salt cell inspection and clean | $50–$100 | Charging for chemicals |
| Green pool cleanup | $350–$800 light to moderate; $800–$1,500+ for a swamp | Green pool pricing guide |
| Acid wash (drain, wash, refill) | $300–$700 | Filter and acid wash pricing |
| Drain and clean (no acid) | $400–$700 | Filter and acid wash pricing |
| Inground pool opening | $250–$450 | Opening and closing prices |
| Inground pool closing | $200–$450 | Opening and closing prices |
| Service or diagnostic call | $75–$150 plus parts | Repair estimate template |
Typical ranges. Acid wash and drain-and-clean ranges line up with national consumer cost guides, as do the opening and closing ranges. Filter and salt cell prices come from local company price lists.
Write your one-time prices down and use the same list every time. A tech quoting a filter clean in the backyard should give the same number the office would.
How to quote a new account
- Check the address against your routes first. Before you spend time on the call, see how far it is from your nearest existing stop on the same day. A pool 3 minutes from a current stop is worth more to you than one 15 minutes away, at the same price.
- Ask the right questions. Rough size or gallons, filter type, salt or chlorine, attached or separate spa, screen enclosure, trees overhead, automatic cover, water features, dogs and gate access, and whether it's green right now.
- See it. Ask for photos of the pool and the equipment pad, or visit. Old equipment, a cracked filter lid or a leaking pump tells you about future repair work, and future headaches.
- Price it from your sheet. Base rate for the service type, plus the adjustments that apply. Don't make up a number on the spot. If you want to win it, win it with service, not a discount you'll have to take back later.
- Put the quote in writing. State the monthly price, visit frequency, what's included, what's extra (filter cleans, salt, green-pool recovery, repairs), how chemicals are handled and the start date. Our pool service quote template covers all of it.
- Close with an agreement and autopay. Have them sign a service agreement and set up automatic payment before the first visit. Customers on autopay pay on time and accept future price increases with less friction.
Keep quotes valid for 30 days. If a prospect comes back in four months, chemical and fuel prices may have moved, and so should the quote.
Pricing mistakes that cost owners the most
- Copying the cheapest competitor. You don't know their costs, and they may be underpricing their way out of business.
- One price for every pool. Adjust for size, debris, spas and distance, or the hard pools eat the profit from the easy ones.
- Chemicals included with no limit. One pool with high stabilizer or a phosphate problem can cost three times the average in chlorine. See how to charge for pool chemicals.
- Never raising prices. Costs go up every year. A steady yearly increase is normal. See how to raise pool service prices.
- Taking far-flung accounts at the normal rate. Every one makes the route longer for everyone else.
- Forgetting your own wage. If the numbers only work because you don't pay yourself, the price is too low.
Common questions
What should I charge per pool when I'm just starting out?
Start at the middle of your local market, not the bottom, and check it against your costs with the pricing calculator. New owners who start cheap to build a route find it hard to raise prices on the first 30 customers later. It's easier to offer a first-month discount than to undo a low monthly rate. Our startup cost guide covers the rest of the numbers you need before your first customer.
Should I charge monthly or per visit?
Monthly, for recurring service. The customer gets one predictable bill and you get predictable revenue. A monthly price covers an average of 4.33 weekly visits, so months with five visits and months with four even out across the year. Per-visit pricing makes sense for seasonal markets, twice-weekly rentals and commercial pools with visit counts that change.
Do I give a credit when I skip a week for weather or a holiday?
Most companies don't credit a single skipped week if they make it up within a day or two, and say so in the agreement. If a visit is genuinely missed and not made up, a credit of one visit (the monthly price divided by 4.33) is fair and keeps trust.
Should I charge more in summer?
In year-round markets, most companies charge the same monthly price all year and let the cheap winter months pay for the expensive summer ones. If your chemical costs in July are far higher than your price can absorb, a summer chemical surcharge or a plus-chemicals structure is more honest than quietly cutting corners. In seasonal markets, price the season, not the year.
How do I price commercial pools?
Separately from residential, and from scratch. HOA, apartment and hotel pools usually need more visits per week, health department logs, a certified operator in many jurisdictions and higher insurance limits. Price them from visits, time on site and chemical use with the same cost formula, and expect them to be several times a residential rate.
How often should I raise my prices?
Once a year, with 30 days' written notice, is the common pattern. Our price increase letter template makes it a ten-minute job. Higher rates also raise what your route is worth if you ever sell, since routes sell on a multiple of monthly revenue (see the route value calculator).
Do I need to charge sales tax on pool service?
It depends on the state. Texas treats pool maintenance as a taxable service (Texas Comptroller), Florida doesn't tax residential pool cleaning but can tax chemicals furnished under a contract (Florida Department of Revenue), and other states have their own rules. Check the state guides under guides and confirm with your state revenue department or accountant.
